Huub Triathlon Wetsuit Repair
This Huub wetsuit came in with a damaged neck. An attempt had been made by the owner to rectify the problem but it continued to tear across the neckline.
This is the inside as it looked when it arrived. The neoprene lining material was delaminating and coming apart.
We removed the damaged section of the suit as it was too badly gone to do a simple patch.
The new piece has been inserted. This is how it looked from the inside.
The finished job looked like this. A suit that was beginning to become unusable, back in service and ready to race.
If you have something like this or any other wetsuit or drysuit repair, give us a call on : 0161 304 8471
Test and repair of Vision Waders, including dry zip replacement
This is how the waders looked when they arrived for test. Its hard to believe that the zip is leaking and there are several holes.
This is the inside view before the process of zip removal. We disassemble, rebuild and fit zips back the way the original manufacturer did it.
The internal sealing tape has been carefully removed to reveal the stitching.
The zip has been unpicked one stitch at a time and lifted out.
The new zip is fitted and ready for sealant and taping.
The zip has now been sealed and taped. The process of dealing with the internal leaks can begin. The crotch seam has had some reinforcement.
Discreet patches are used to mend small holes and leaks.
The patches are made from the same material as the wader lining, so they are flexible and don’t cause further problems such a friction leaks.
This is the finished item. We always aim to make it look as though nothing has been touched, restoring things to original manufacturer specification or better.
If you need Waders repairs the contact us on: 0161 304 8471.
Northern Diver Dry Suit – repair assessment.
This Northern Diver dry suit was sent in for new seals. A recent purchase for a novice diver.
We inspected the seals and over cuffs.
Both the cuffs and neck were in poor condition which was not a major problem as they could all be put back into working order.
However the zip was clearly beyond use and the internal seam taping was crumbling away.
Most of the seams at the top of the suit were completely gone.
We discussed the matter with the client and suggested that obtaining a refund from the point of purchase would be the best option. We could have restored this suit but the cost would have been too much compared with the value and quality of the suit. We helped him with supporting information and he got his money back.
If you need a suit assessing to see if it is viable then contact us on 0161 304 8471.
Dry suit repairs at: www.gybe.co.uk
Speedo Triathlon Wetsuit
This came in with an emergency repair job on the shoulder. It was a bit of a mess.
Close view of the original
This is what it looked like after we had cleaned off the glue/sealant the had been used for the emergency repair.
Internal view of the seam intersection with reinforcement to the seams. All internal patching has been done with ultra thin, flexible patches.
This is how it looked when finished. Clean and tidy. Ready to go.
If you need your Triathlon wetsuit repairing then contact us at : firstname.lastname@example.org
Wetsuit repairs at: www.gybe.co.uk
Tel 0161 304 8471
Si Tech Modular Silicone Wrist Seal System fitted to Azdry Drysuit.
Azdry drysuit showing the original, standard seals
The original seals have been carefully removed ready for the fitment of the new soft plastic mounting rings.
New seal mounting rings fitted.
The rings have been tidied up and over-taped. the rings are now ready for the silicone seals to be fitted ready for use.
The finished job. The Si Tech rings are rigid enough to support the seals whilst being soft enough to be comfortable.
Ready to go.
If you need something like this then give us a call or email: email@example.com
Drysuit repairs at www.gybe.co.uk
0161 304 8471
Aqua Shere Triathlon Wetsuit Repair.
This suit came in with damage that is typical of this kind of suit and its use. Athletes are always in a rush to get out of their suits and this is the inevitable consequence. It is easily sorted though.
Outside of the suit showing the tear at the base of the zip and the base seam beginning to come apart.
Inside view of the suit showing the tear and the inner reinforcement of the zip base seam giving up.
This is the outside view after the base and the seam have been repaired.
This is the inside after repair and reinforcement. Flat, flexible, welded, fabric covered patches have been added to give strength without bulk.
If you need something like this doing to you suit, then contact us on 0161 304 8471.
Wetsuit and Drysuit repairs at: www.gybe.co.uk
Avon Drysuit Repair
This is an Avon Dry Suit that we have just had in for refurbishment. The original seals had rotted away and in some places melted into the surface of the suit. We used specialised cleaners and patience to remove the old seals and sort the damaged areas.
The final result. New wrist seals and neck seal.
Drysuit repairs at www.gybe.co.uk
0161 304 8471
Crewsaver Dry Suit Repair.
This Crewsaver suit came in for new latex socks to be fitted. We do loads of these so it is pretty straight forward. Original socks viewed from the inside.
The old sock is gently released so as not to damage the dry suit leg. The gluing area is cleaned.
The new socks are fitted on the inside. Good as new and as good as the day that it left the Crewsaver factory.
External view of the new socks fitted and ready for use. Just as good as the day they were made.
Got something like this? Call us on :0161 304 8471
Here’s a nice simple job. A Santi dry suit with a broken neck seal. The seal is carefully lifted out.
The new seal is fitted into place and the suit is ready to go.
Need something like this? then give us a call.
Tel: 0161 304 8471 or www.gybe.co.uk
1. Wader zip replacement. This was a second hand but usable zip taken from an old pair of waders. The customer wanted it to be fitted to this newer serviceable pair of waders
2. Wader zip replacement. The old zip is carefully disassembled ready to be fitted to the newer pair of waders
3. Wader zip replacement. Newer waders ready to be marked up and prepared for the zip to be inserted
4. Wader zip replacement. Zip hole has been formed and the replacement zip is ready for insertion
5. Wader zip replacement. Replacement zip is fitted and sealed using welded tape – internal view
6. Wader zip replacement. Replacement zip is fitted and sealed using welded tape – external view
If you need something like this please give us a call. If you don’t see what you want we can probably do it for you. Please ask.